Custom Trash Can Drawer Boxes

Hide Unsightly Waste With Custom Size Trash Can Drawer Boxes

Trash can custom drawer boxes help hide unsightly waste while still being convenient and accessible. We offer these in two different styles:

1. SIT STYLE TRASH DRAWER BOX

2. HANG STYLE TRASH DRAWER BOX

SIT STYLE TRASH DRAWER BOX
We designed this custom drawer box style to be mounted towards the bottom of the cabinet using either sidemount or undermount drawer box slides. Subsequently, the trash can will sit on the bottom of the custom size drawer, and it will be held in place by the lid.

HANG STYLE TRASH DRAWER BOX
We make this custom trash drawer box with tapered sides and no bottom. We designed the hang style trash drawer box to be mounted towards the top of the cabinet with sidemount drawer box slides. As a result, the trash can is supported by the custom trash drawer box lid.

TRASH DRAWER BOX LIDS
We offer custom trash drawer box lids that are cut out for the Rev-A-Shelf, 6700-61-52, 7-1/2 gallon trash can. This is offered with one or two cutouts. Alternately, you may also request a lid with no cutout, which you may cut out to hold your desired trash can.

View our custom trash drawer box spec’s below, then request a quote on your next job!

Sit Style Trash Drawer Box

This drawer box is designed to allow a 7-1/2 gallon Rev-A-Shelf (Part #: 6700-61-52) trash can to set inside. The trash can is NOT included. The drawer box would be mounted towards the bottom of the cabinet using side or undermount drawer slides.

The drawer box is 10” high with a 1/4” inset around the top.
The width and depth of the drawer box are defined by the customer.
The minimum width for; single cutout = 9-3/4″, double cutout = 15-5/8″.
The minimum depth for; single cutout = 15″, double cutout = 18-3/4″.
The top is removable and can be replaced if necessary.
The top is 1/4” thick matching plywood, which is available with 3 options.
- NO cutout, the customer would make their own cutout(s).
- Single cutout, which goes front to back (see drawing below).
- Double cutout, which has one cutout in front of the other (see drawing below).

Trash Sit

trash-can-pullout-box-diagram

Hang Style Trash Drawer Box

Trash Hang

This drawer box is designed to allow a 7-1/2 gallon Rev-A-Shelf (Part #: 6700-61-52) trash can to hang from the top. The trash can is NOT included. The drawer box would be mounted towards the top of the cabinet using side mount drawer slides.

The drawer box is 10” high in the front and 4” high in the back, with a 1/4” inset around the top.
The width and depth of the drawer box are defined by the customer.
The minimum width for; single cutout = 10-3/4″, double cutout = 16-5/8″.
The minimum depth for; single cutout = 16″, double cutout = 19-3/4″.
The top is removable and can be replaced if necessary.
The top is available with 3 options.
- NO cutout, the customer would make their own cutout.
- Single cutout, which goes front to back (see drawing below).
- Double cutout, which has one cutout in front of the other (see drawing below).

trash-can-pullout-box-diagram2