This unit can be used as either a spice or can box (rack) and is designed to be hung on a door or used as an upright rollout.
- Recommended heights are as follows;
- spice box 3-3/4”
- can box 5-3/4”
- to keep from puttying dovetails, a fraction of 3/4” is recommended.
- The bottom thickness is 1/2” (designed to be flush with the bottom sides).
- Adjustable shelves are used to divide the spice box into horizontal sections. Two (2) rows of 3mm diameter holes are drilled on each side (inside) of the box. The holes are referenced from the center of the box and are drilled in both directions (in increments of 32mm).
- The shelves are slotted on each end so that they can slide on metal pins and are held in-place with a 2” high plexiglass front. The shelves are constructed as follows;
- the top front of each shelf is routed to accept the 1/8” thick plexiglass front.
- 4 metal pins are provided with each shelf.
- 2” high plexiglass front that goes the full width of the box.
- same material and thickness as the box sides.
Depth Range | Shelves |
---|---|
9-1/2” to 16” | 1 |
16-1/8” to 22-5/8” | 2 |
22-3/4” to 29-1/4” | 3 |
29-3/8” to 35-7/8” | 4 |
29-3/8” to 35-7/8” | 5 |
42-5/8” to 49-1/8” | 6 |
49-1/4” to … | 7 |