Custom Drawer Box Handpulls & Contours

Handpulls and Contours Provide Stylish and Practical Custom Rollout Drawer Storage

Handpulls and Contours are an easy way to dress up custom pullout/rollout drawer boxes. Moreover, they can make pullout drawer boxes more practical, as well.

HANDPULLS
Handpulls provide a simple, convenient scoop to be able to easily open a custom dovetail drawer in a tight stack of exposed front, pullout drawer boxes. Moreover, handpulls give added visual interest to help your cabinetry stand out. In addition, while our Handpull Style “E” can be used as a handpull, and it is primarily designed to be used as a lock cutout.

CONTOURS
Our Single Side Scallop is a low-front contour, which provides added visibility in the front of a custom size pullout drawer box. However, it also provides a high back to help keep items in place in the custom drawer box.

The Range Side Scallop is a low-back contour, which provides a high front to give ample surface and added stability for attaching a drawer front. This is especially useful under a cook top. Another application is for trash boxes where a door will be attached to the front of the drawer. In addition to the high front, a low back provides ease of access for items in the custom dovetail drawer.

The Dual Side Scallop is a high-end, low-middle contour, which provides convenient side access for taller drawer boxes. Moreover, when combined with custom drawer box dividers, these can also create excellent cookie tray storage.

Additionally, we offer two standard taper design options for when this is desired rather than a scallop design. Furthermore, we are always happy to review custom side contour requests.

As a result of our Handpull and Contour design features, these stylish and practical custom size pullout drawer options arm you with versatility to be able to meet your customers needs. View all of our standard handpull and contour options below, then contact us for a quote on your next job!

Side Contours

Single Side Scallop (SP-010)

This drawer box is typically used as a pullout drawer. It has a lower front that is scalloped up on each side to a higher back.

The front of this drawer box has the same wood specifications as the sides.
Parameters A and B must be the same inch increment. In other words, the drop (difference) from the back to the front must be in whole inch increments. (Ex.: A (front) = 2-1/8” and B (back) = 5-1/8”)
The first radius starts 4” from the front of the box.
The scallop radii are equal and determined as follows:
- 1″ Drop = 2″ Radius
- 2″ – 5″ Drop = Radius equals the drop
- Drop > 5″ = Radius equals half the drop

Dual Side Scallop (SP-011)

This dovetail drawer is typically used as a pullout drawer box. It has a lower middle that is scalloped up on each side to a higher front and back.

The front of this drawer box has the same wood specifications as the sides.
The scallop radii start 3” from the front & back of the box.
All radii are 2-1/4″.

Range Box Side Scallop (SP-012)

This drawer box is typically used as a cooking range drawer and has a lower back that is scalloped up on each side to a higher front.

The front of this drawer box has the same wood specifications as the sides.
Parameters A and B must be the same inch increment. In other words, the drop (difference) from the front to the back must be in whole inch increments. (Ex.: A (back) = 2-1/8” and B (front) = 5-1/8”)
The first radius starts 2-1/4” from the front of the box.
The scallop radii are equal and determined as follows:
- 1″ Drop = 2″ Radius
- 2″ – 5″ Drop = Radius equals the drop
- Drop > 5″ = Radius equals half the drop

Diagonal Full Taper (SP-013)

This dovetail drawer is typically used as a pullout drawer box. One end is higher, and the sides are tapered to the other end, which is lower.

The front of this drawer box has the same wood specifications as the sides.
Parameters A and B must be the same inch increment. In other words, the drop (difference) from the high end to the low end must be in whole inch increments. (Ex.: A = 2-1/8” and B = 5-1/8”)
The taper runs the full length of each side from one end to the other.
The customer must specify which end is to be higher and which end is to be lower.

Diagonal Partial Taper (SP-014)

This dovetail drawer is typically used as a pullout drawer box. One end is higher, and the sides are partially tapered to the other end, which is lower.

The front of this drawer box has the same wood specifications as the sides.
Parameters A and B must be the same inch increment. In other words, the drop (difference) from the high end to the low end must be in whole inch increments. (Ex.: A = 2-1/8” and B = 5-1/8”)
The taper starts 4” from the high end and runs the remainder of each side to the other end.
The customer must specify which end is to be higher and which end is to be lower.

Handpulls

The following are standard handpull designs. When ordering, indicate a “Style”. If no style is indicated, “Style A” will be selected.

The custom cutout price will be applied when none of the standard handpull designs apply or if the box is less than 7” wide.

Standard handpull design (CM-090 to CM-094).
Custom handpull design or box < 7” wide (CM-099).

Dovetail Hand Pulls

handpulls-b

handpull-c

handpull-d

handpull-e

Keyboard Drawer Box

Keyboard Box Layout

Keyboard Drawer Box (SP-020)

This dovetail drawer is typically used as a computer keyboard pullout drawer box. The center of the front is cut down to 1” and scalloped up to 2” towards each side of the front.

The front of this drawer box has the same wood specifications as the sides.
Parameters A (mid) = 1″ and B (sides) = 2″.
The radius starts 3/4” from each end and scallops to 3” from each end.
A double access box is also available (SP-021) where the cutout is on the front and back.