Phone: (717) 898-7564

Fax: (717) 898-7663

Email: order@svwoodcrafters.com

Menu

Hand Pulls & Side Contours for Wooden Drawer Boxes

Front hand pulls and side contours are ideal when used on cabinet, pantry rollouts, and wooden drawer boxes. Our various designs of hand pulls allow for fingers (or a hand) to easily pull out the dovetail drawer. The side contours add a touch of design and make it convenient to view and reach items in the wooden drawer box once it is rolled out. We also work with our customers to design custom hand pulls and side contours.

Side Contours

Single Side Scallop (SP-010)

This drawer box is typically used as a pullout drawer. It has a lower front that is scalloped up on each side to a higher back.

  • The front has the same wood specifications as the sides.
  • Parameters A and B must be the same inch increment; i.e. A = 2-1/8” and B = 4-1/8”.
  • The first radius starts 4” from the front of the box.

Hand Pulls and Side Contours

Hand Pulls and Side Contours


Dovetail Drawer Box Hand Pulls

Dovetail Drawer Box Hand Pulls

Dual Side Scallop (SP-011)

This wooden drawer box is typically used as a pullout drawer. It has a lower middle that is scalloped up on each side to a higher front and back.

  • The front has the same wood specifications as the sides.
  • Parameters A and B must be the same inch increment; i.e. A = 2-1/8” and  B = 4-1/8”.
  • The first radius starts 3” from the front of the box.


Range Box Side Scallops (SP-012)

This box is typically used as a cooking range drawer and has a lower back that is scalloped up on each side to a higher front.

  • The front has the same wood specifications as the sides.
  • Parameters A and B must be the same inch increment; i.e. A = 2-1/8” and B = 4-1/8”.
  • The first radius starts 2-1/4” from the front of the box.

Drawer Box Customization

Drawer Box Customization


Wood Box

Wood Box

Diagonal Full Taper (SP-013)

This box is typically used as a pullout drawer. It has a higher back that is tapered on each side to a lower front.

  • The front has the same wood specifications as the sides.
  • Parameters A and B must be the same inch increment; i.e. A = 2-1/8” and  B = 4-1/8”.
  • The taper runs the full length of each side from back to front.


Diagonal Partial Taper (SP-014)

This wooden drawer box is typically used as a wooden pullout drawer. It has a higher back that is partially tapered on each side to a lower front.

  • The front of this drawer box has the same wood specifications as the sides.
  • Parameters A and B must be the same inch increment; i.e. A = 2-1/8” and  B = 4-1/8”.
  • The taper starts 4” from the back and runs on each side to the front.

Custom Drawer Box Construction

Custom Drawer Box Construction


Hand Pulls

The following are standard hand pull designs. When ordering, indicate a “Style”. If no style is indicated, “Style A” will be selected.

The custom cutout price will be applied when none of the standard hand pull designs apply or if the box is less than 7” wide.

  • Standard hand pull design (CM-090 to CM-094).
  • Custom hand pull design or box < 7” wide (CM-099).

 

Dovetail Hand Pulls

 

handpulls-b

handpull-c

 

handpull-d

 

handpull-e


Keyboard Box Layout

Keyboard Box Layout

Keyboard Box (SP-020)

This box is typically used as a computer keyboard pullout drawer. The center of the front is cut down to 1” and scalloped up to 2” towards each side of the front.

  • The front of this wooden drawer box has the same wood specifications as the sides.
  • Parameters A = 1“ and B = 2”.
  • The radius starts 3/4” from each end and scallopes to 3” from each end.
  • A double access box is also available (SP-021) where the cutout is in the front  and back.