The following top edge profiles are available at no additiional charge, except for step down construction (See Green dovetails).

For the bullnose radius, the default is step down construction...

• the ends (front and back) are set to full height.
• with 1/2” sides, the sides are dropped 1/8” below the ends.
• with 5/8” sides, the sides are dropped 1/4” below the ends.

The following top edge profiles are available with an upcharge.

• These edges are applied to the box after it is assembled.
• Unassembled boxes can not have these edges applied.
• All top edges have the indicated radius, except the face edge on the front which has a machine edge.