This box is designed to allow a 7-1/2” gallon Rev-A-Shelf (Part #: 6700-61-52) trash can to set inside. The box would be mounted towards the bottom of the cabinet using side or undermount drawer slides.

• The box is 10” high with a 1/4” inset around the top.
• The width and depth of the box are defined by the customer.
• The minimum width for; single cutout = 9-3/4", double cutout = 15-5/8".
• The minimum depth for; single cutout = 15", double cutout = 18-3/4".
• The top is removable and can be replaced if necessary.
• The top is 3/8” thick birch plywood, which is available with 3 options.
  • NO cutout, the customer would make their own cutout(s).
  • Single cutout, which goes front to back (see drawing below).
  • Double cutout, which has one cutout in front of the other (see drawing below).
  
  

   

This box is designed to allow a 7-1/2” gallon Rev-A-Shelf (Part #: 6700-61-52) trash can to hang from the top. The box would be mounted towards the top of the cabinet using side mount drawer slides.

• The box is 10” high in the front and 4” high in the back, with a 1/4” inset around the top.
• The width and depth of the box are defined by the customer.
• The minimum width for; single cutout = 10-3/4", double cutout = 16-5/8".
• The minimum depth for; single cutout = 16", double cutout = 19-3/4".
• The top is removable and can be replaced if necessary.
• The top is available with 3 options.
  • NO cutout, the customer would make their own cutout.
  • Single cutout, which goes front to back (see drawing below).
  • Double cutout, which has one cutout in front of the other (see drawing below).