Assemble
Box assembly includes dovetail or bore & dowel construction. It can include assembling the sides with or without a bottom (if there is a bottom, it is pinned or stapled with 1/2" brads and sealed with hot melt glue). The standard tasks, based on side material type, are specified below.

Finish (Only Applies to Assembled Boxes)

Boxes are finished with a water-based acrylic lacquer, which is non-yellowing and utilizes HAPS-Free (contains no Hazardous Air Pollutants) co-solvent technologies to provide a unique self-leveling wood finish. This finish meets the Kitchen Cabinet Manufacturers Association (KCMA) testing standards. It also demonstrates excellent water resistance, and chemical and food stain resistance exceeding that of traditional nitrocellulose lacquers.

The finishing option consists of 1 sealer coat and 2 top coats.

If a box exceeds 100 lineal inches an upcharge is applied.

Notch

Two (2) standard undermount slide notching widths are offered for the bottom rear of the box, along with a hook hole. The depth of the notch matches the requested inset (i.e., 1/2”, 9/16”, etc.)

• 2” wide notch for back of box.
• 3-3/4” wide notch for back of box.
• hook hole for back of box.