This box is typically used as a pullout drawer. It has a higher back that is tapered on each side to a lower front.

• The front has the same wood specifications as the sides.
• Parameters A and B must be the same inch increment; i.e. A = 2-1/8” and B = 4-1/8”.
• The taper runs the full length of each side from back to front.

This box is typically used as a pullout drawer. It has a higher back that is partially tapered on each side to a lower front.

• The front has the same wood specifications as the sides.
• Parameters A and B must be the same inch increment; i.e. A = 2-1/8” and B = 4-1/8”.
• The taper starts 4” from the back and runs on each side to the front.